Midmark/Ritter M7 SpeedClave Autoclave Sterilizer

The Ritter M7 Autoclave is the answer to easier, cleaner, more efficient and environment-friendly sterilization. In fact, the speedy M7 Autoclave is the perfect choice for anyone looking for an effective, manual sterilizer...at an unbelievably low price.

This autoclave has been through our standard restoration process as follows:

1. Clean reservoir tank by flushing
2. Clean interior of door cover
3. Install new heating element
4. Install new OT thermostat
5. Clean bottom plate, install
6. Install new bellows
7. Install new safety valve
8. Calibrate temp/pressure to factory specifications with factory calibration equipment
9. Replace high pressure hose
10. Replace chamber filter
11. Install new door
12. Run Speedclean cycle to demineralize internal tubing and components as per factory specifications
13. Run spore test
14. Check reservoir tank
15. Continue to test over and over to insure quality

Whats In the Box?
* Refurbished M7 sterilizer
* 2 trays
* 5 integrator spore test strips
* Power cord
* User manual

* Only 9 1/2 minutes from a cold    start, hot start 6 1/2 minutes. * No plumbing is required, has its    own reservoir for distilled or    demineralized water. * All controls on the front. * Low water cut-out switch prevents    “dry burning” * Reset button saves time * Safety door automatically seals    when pressurized and will not open    until chamber is depressurized.

Dimensions, Weight, Power Requirements: * Overall dimensions    (18.12"x13.56"x12.81") * Chamber (7.5"x15") * Capacity (2.4 gallons) * unit weight (30 lbs) * Electrical (120V, 60Hz)