Midmark M11 Ultraclave 
 Click Here To See Other Autoclaves!

$ 500.00 Cash Rebate!  Offer Ends December 31, 2008!

You load it....set it...and forget it. Select your cycle and the time is set for you. Press start and the Midmark M11 ultraclave fills, sterilizes and exhaust automatically. Door opens at the end of the cycle to dissipate the steam.

Overall dimensions(22.8"x17.8"x17.8")
Chamber(11"x18")
Capacity (6.5 gallons)
2 large trays(15"x9"x1-1/8")
2 small trays(15"x6-5/8"x1-1/8")
unit weight (99 lbs)
Electrical(115V, 50/60 Hz)

Optional recorder- $475.00

Self Program Controls
The Midmark M11 Ultraclave programmable controls allow for creation of different cycle parameters for special sterilization needs.  Programmable buttons allow you to change the following: Time (3 to 90 minutes), Temperature (230 to 275º F), Dry Time (0 to 60 minutes), Vent (slow or fast) and two program buttons. The #1 and #2 buttons allow you to store the change if desired.

Pre-Programmed Controls
The Midmark M11 Ultraclave has four pre-programmed sterilization cycle controls:  Unwrapped (132º C or 270º F for 3 minutes), Pouched (132º C or 270º F for 5 minutes), Packs (121º C or 250º F for 30 minutes), Handpiece (Dental Handpiece use only)

LCD Display
The Midmark M11 Ultraclave LCD display indicates cycle selected, temperature and exposure time for selected cycle. During the cycle, the display shows messages describing status of cycle. When the cycle enters sterilization mode, remaining time is displayed as well as temperature and pressure.

Cycle Start
(Initiates selected cycle)

Manual Stop
(Terminates selected cycle or function)