4th Quarter Winners Circle Autoclave Promotion Valid Until Feb 1, 2014
Ritter By Midmark M9 Ultraclave With Automatic Door
Nothing could be more important to a medical practice than a serious sterilization protocal. There are liability issues regarding the use or improper use of an autoclave in the medical practice. The M9 Ultraclave meets and exceeds these standard parameters of time, pressure and temperature necessary to kill microorganisims by utilizing saturated steam under pressure. The 9" x 15" inch stainless steel chamber is roomy and adequate for most busy clinics. It couldn't be easier to use with many features that are very obvious to the person in charge of sterilization and spore test results. The M9 is an American made product that has been in production since the early 1990's and is still made in Versaille, OH USA. The unit has gone through numerous improvements and upgrades since it's inception. The newest version offers a motor driven door switch and a newly improved CPU board along with an improved optional printer.
Benifits of the M9 Autoclave include:
The M9 Ultraclave has four defined cycles of unwrapped, pouches, packs and handpieces. These four cycles easily cover over 98% of sterilizing requirements. There is also the ability to create and store customs cycles with the self program controls. This will enable the operator to have the flexibility to create special cycle parameters to meet specific instrument processing needs such as glassware, liquids and other media.
The Autoclave is has a bright LCD Display for easy view of indicators will give an automatic warning any time a sterilization cycle is interrupted. This could be due to an operator action or momentary power failure, but will result in a highly visible message that automatically warns the operator that items inside the chamber are not sterile.
Overall length w/plug: 20.4" (51.8 cm)
Overall width: 15.3" (38.9 cm)
Overall height w/printer: 15.8" (40.1 cm)
Minimum Countertop area: 15.3" x 17.9" (38.9 cm x 45.4 cm)
9" diameter (22.9 cm)
15" depth (38.1 cm)
3.5 gal. usable volume (13.4 liters)
Two large –7.3"
W x 12" L x .8" D
(18.6 cm x 30.5 cm x 2.2 cm)
Two small – 5.6" W x 12" L x .8" D
(14.3 cm x 30.5 cm x 2.2 cm)
Unit weight: 73 lbs. (33.1 kg)
Shipping weight: 81 lbs. (36.7 kg)
Water reservoir capacity: 1.1 gal. (4.1 liters)
115 VAC, 50/60 Hz, 15 Amps Single Phase
115 VAC has 1425 watt tubular immersion heater
CAN/CSA C22.2 No. 1010
CAN/CSA C22.2 No. 1010.2-041-96
Meets the requirements of ASME Boiler and Pressure Vessel Code
Canadian Registration Number (CRN) available
A separate (dedicated) circuit is recommended for this sterilizer
Download M9 Autoclave PD