Well maintained Midmark/Ritter M11 autoclave. Not only are we willing to stand behind it with a 90 day warranty, this units fully meets the approval of our trained and certified technician.He has inspected this autoclave from the inside and out, then calibrated and spore tested to manufacturer's specifications. It comes with the operators manual, a large and small tray, and 5 free spore indicator strips. 

This autoclave has been through our standard restoration process as follows:

1. Remove motherboard and replace necessary components
2. Clean reservoir tank by flusing
3. Take off door cover, clean and lube door latch mechanism
4. Clean interior of door cover
5. Install new heating element
6. Install new OT thermostat
7. Clean bottom plate, install
8. Install new bellows
9. Install new door switch
10. Install new drain hose
11. Install new safety valve
12. Reinstall motherboard with test gauge
13. Calibrate temp/pressure to factory specifications with factory calibration equipment
14. Replace high pressure hose
15. Replace chamber filter
16. Install new door and dam gasket
17. Run Speedclean cycle to demineralize internal tubing and components as per factory specifications
18. Run spore test
19. Continue to test over and over to insure quality 
    
    
    
The roomy 11" x 19" stainless steel chamber is suitable for sterilization of liquids, media, instruments, glassware, or waste. .

This Unit won't last long so call 888 729-2332.